Non Slip Decking, How to Create Attractive Garden With Non Slip Decking

Shares
|ShareTweet

Are you looking for non slip decking ideas to transform your garden? I have here about how to create attractive garden with non slip decking.

A bland and boring garden can easily be transformed into something more inspiring and appealing with the use of non-slip decking used in just the right way. Most people choosing to add decking to their home or garden will often opt to create a sun-trap where they can relax after a hard day at work or at the weekends with a nice refreshing iced drink, but that does not have to be the extent of the design. Non-slip decking can also be used to create an attractive play area for children, a simple focal point or even surrounding decking for a swimming pool or if you’re lucky enough to be by the water’s edge – a jetty.

Installing non-slip decking is one of those DIY tasks that often intimidates and people feel is beyond their skill-level. But with careful planning it can be an easy, yet rewarding task which will leave your garden looking presentable for years to come.

Non Slip Decking, How to Create Attractive Garden With Non Slip Decking

How to Create Attractive Garden With Non Slip Decking

Planning the installation

It’s important to remember that non-slip decking can be used in a number of different ways. You might use an elevated design, build in steps and fencing, create designs in various angles, build in slopes or even add split-level designs. Of course once the design is done and the decking is in place you can even add further finishing touches to your area with climbing plants, hanging baskets, archways and lighting.

As with anything else, planning is key. Draw up a plan and make sure all the members of the home agree before you get started. A decking design will be part of your garden for several years to come, so it’s important to create something you (and everyone else) can enjoy now and into the future.

Preparing

The following steps will help ensure your decking installation gets off to a smooth start.

  1. Spend a week or so paying close attention to the way the sun moves around your garden. If you’re trying to build a decking area which makes the most of the sun it’s no good building it in a spot which spends most of the day in the shade. But of course, also bear in mind the majority of time you will be using the decking area – your chosen area might be drenched in sunshine in the evening when you plan to use it the most, but not during the rest of the day. Obviously, the seasons will make a difference. So plan ahead. The other consideration is if your decking area is constantly in the shade it might be at risk of algae build up. Once again, our non-slip decking is specially treated with TANNALITH E preservative to help prevent this problem, but it is still worth bearing in mind.
  2. Bear in mind your surroundings. If you construct your decking area under or near a tree or large flowering plant then you may often find the decking covered in leaves which could present a slip hazard. Our non-slip decking will help prevent this from being an issue, but you still may have to go to the trouble of regularly cleaning leaves and petals off the surface.
  3. Consider your neighbours. Is your decking feature going to be used as a focal point of the garden or a secluded spot for you to relax? If you want somewhere to enjoy the sun’s rays then bear in mind any surrounding houses or other fields of view. You might not want your neighbours constantly spying on your every move.
  4. Keep it simple – many people set out with big plans that end up going horribly wrong and costing the earth or just become unsightly. A simple design is often best. Make a simple plan and stick to it, it will keep costs down but still add the special something to your garden design.

Getting Started With The Non Slip Decking

Begin your decking design plans by taking full measurements and staking out the chosen area. It might help to draw the design if you can do so, in order to get a good working idea of what the decking area might look like.

If you are planning to install your decking at ground level then it is important to carry out a surface preparation. If you are going to put the decking over an area which is currently grassy then be sure to remove all the turf and cover the area with a retardant growth fabric to prevent the grass, weeds or anything else from re-appearing underneath the decking. A covering of pea shingle may also be necessary to prevent rotting due to moisture build-up.

Support posts and bearer framework may be required if you are planning on an elevated decking design.

Take proper measurements before getting started to ensure you order the right amount of decking and don’t overspend. Bear in mind you may have to make cuts yourself in order to fit with your design.

Depending on your design the decking boards can just be bolted, nailed or screwed together. Ensure each and every decking board is secured properly and you’ll have a decking feature that you can enjoy for years to come!

Equipment:

  • Dusk mask for the face and nose when cutting timber.
  • RCD Adaptor Eye goggles.
  • Safety gloves for handling timber.
  • Knee pads.

Assembly Tools

  • Power drill and drill bits and driver system for screwing down decking boards.
  • Power saw for cutting and shaping the decking boards and surface areas.
  • Spanners and socket set for coach bolt timber assembly.
  • Tape measure, hammer, spade, wood clamps, string lines and wood pegs for staking out layouts.
  • Chisels if adding balustrades or pergolas to the decking design structure.

Recommended reading: Pool Deck Ideas, How to Enhance Your Pool Area With a Pool Deck

Did you find how to create attractive garden with non slip decking post helpful? Share it on facebook and pinterest.

 

Source: http://EzineArticles.com/6497558

Shares
|ShareTweet

Leave a Reply

Your email address will not be published. Required fields are marked *